Lubricore B230 is a 30 % dispersion of sub-micron hBN (D90 ≈ 0.4 µm) in a PAO-6 synthetic base oil, designed for direct use in premium lubricant and grease formulations. The ultra-fine hBN provides superior anti-wear, anti-friction, and thermal-conductivity benefits while maintaining full compatibility with synthetic and mineral oil systems. Its small particle size ensures stable suspension, smooth surface coverage, and consistent performance under high shear and elevated temperature. Lubricore B230 is ideal for gear, hydraulic, and compressor oils where thermal control, low friction, and extended lubricant life are critical.
Lubricore B250 contains 25 % of hBN (D90 ≈ 0.4 µm) dispersed in a Group V synthetic vegetable ester carrier. Engineered for biodegradable and environmentally acceptable lubricants (EALs), B250 offers outstanding lubricity, film stability, and oxidative resistance. The fine-particle hBN enhances surface smoothness and reduces wear, while the ester base provides excellent polarity and additive compatibility. It is a preferred component for eco-friendly hydraulic oils, chain lubricants, and food-grade greases, delivering measurable friction reduction and improved energy efficiency without compromising sustainability.
Lubricore B260 is a 25 % dispersion of hBN (D90 ≈ 2.5 µm) in a Group V synthetic vegetable ester base fluid. With larger particle geometry, it offers robust load-carrying, anti-seize, and heat-transfer performance for heavy-duty and slow-speed applications. The combination of micro-scale structure and polar ester medium provides strong film formation and exceptional adhesion to metal surfaces. B260 is optimized for industrial and marine greases, open-gear lubricants, and high-load chain systems, enabling formulators to produce PFAS-free, high-performance, and biodegradable lubricants that balance power density with environmental compliance.
Lubricore W850 is a 50 % dispersion of WS₂ solid lubricant (sub-micron, D90 ≈ 0.4 µm) in PAO-6 synthetic oil, delivering extreme anti-friction and extreme-pressure (EP) performance at very low treat rates. The engineered tungsten disulfide forms a tenacious tribofilm on metal surfaces, reducing the friction coefficient to below 0.03 while enhancing load capacity and oxidative stability. Its PAO carrier ensures easy blending with mineral or synthetic oils and excellent compatibility with additive packages. Lubricore W850 is suited for gear oils, hydraulic fluids, greases, and top-up treatments, providing a fast and efficient route to upgrade formulations with cutting-edge WS₂ technology.
WS₂+ Gasoline Engine Booster is an advanced anti-wear (AW) and anti-friction (AF) additive engineered to enhance the performance of gasoline engine oils.
Formulated with nano-engineered WS₂ and proprietary surface-active agents, WS₂+ Gasoline Engine Booster significantly reduces fuel consumption, operating temperature, and engine noise, while lowering emissions and improving overall efficiency. By forming a durable tribofilm on metal surfaces, it protects against boundary wear and scuffing even under high-load, high-temperature conditions.
WS₂+ Gasoline Engine Booster ensures smoother operation, extended lubricant life, and longer engine durability—making it ideal for passenger cars, motorcycles, and light-duty trucks where both performance and environmental compliance are critical.
WS₂+ Diesel Engine Booster is an advanced multifunctional additive formulated to elevate the performance of diesel engine oils by delivering outstanding anti-wear (AW), anti-friction (AF), and TBN-boosting properties.
Built on a nano-engineered WS₂ dispersion platform, WS₂+ Diesel Engine Booster forms a durable, low-friction tribofilm on metal surfaces, reducing wear and maintaining film strength under severe load and thermal stress. Its unique chemistry improves oil alkalinity retention and oxidative stability, enabling up to three times longer oil life compared with conventional formulations. In field applications, WS₂+ Diesel Engine Booster has demonstrated significant reductions in downtime, maintenance frequency, and filter replacements, while improving engine cleanliness and lowering operating temperatures.
Designed for heavy-duty diesel engines in trucks, construction, mining, and agricultural equipment, WS₂+ Diesel Engine Booster delivers measurable efficiency gains, extended drain intervals, and long-term engine protection under demanding real-world conditions.
WS₂+ Industrial Oil Booster is a high-performance additive package that synergistically combines Tungsten Disulfide (WS₂) to deliver exceptional anti-wear (AW), anti-friction (AF), extreme-pressure (EP), and corrosion-inhibiting performance. This advanced dual-solid system forms a durable tribofilm that significantly reduces metal-to-metal contact, friction, and wear even under extreme temperature and load conditions.
Designed for industrial lubricants, gear oils, compressors, pumps and heavy-duty machinery, WS₂+ Industrial Oil Booster enhances load capacity, reduces component degradation, and extends lubricant life—often by up to three times compared to conventional oils. Field applications show marked reductions in maintenance frequency, downtime, and filter change intervals, translating to improved equipment uptime and lower total cost of ownership.
WS₂+ Industrial Oil Booster is a turnkey solution for operators seeking superior reliability, cleaner operation, and sustainable performance improvement in the most demanding industrial environments.
Solidex B004 is a high-purity, sub-micron hexagonal boron nitride (hBN) powder with an average particle size of approximately 0.4 µm, engineered for advanced lubrication, thermal management, and surface-protection applications. Its lamellar crystal structure creates a low-friction lubricating film that reduces wear, lowers torque, and improves surface smoothness under high-load and high-temperature conditions. Solidex B004 is ideal for premium greases, metalworking fluids, thermal coatings, polymer composites, and food-grade lubricant formulations requiring electrically insulating and chemically inert solid lubricants.
Solidex B004M is a surface-modified sub-micron hBN powder specifically engineered for oil and synthetic lubricant applications. Proprietary surface treatment enhances compatibility with mineral oils, PAO, esters, and additive packages, significantly improving dispersion stability and tribofilm formation. Solidex B004M delivers outstanding anti-wear (AW), anti-friction (AF), and thermal-conductivity performance while minimizing sedimentation and agglomeration commonly associated with untreated powders.
Solidex B025 is a micron-sized hexagonal boron nitride (hBN) powder with an average particle size of approximately 2.5 µm, developed for applications requiring balanced tribological and thermal performance. Its particle morphology provides enhanced surface coverage, heat dissipation, and wear resistance in high-temperature greases, industrial lubricants, release agents, and metal-processing compounds.
Solidex B025M is a surface-engineered hBN powder designed for oil-based lubricant and grease systems requiring improved wetting, dispersion stability, and long-term performance consistency. The modified particle surface promotes stronger interaction with lubricant carriers and metal interfaces, enabling improved anti-friction behavior, thermal management, and tribofilm durability under severe operating conditions.
Solidex B025MW is a specially modified hBN powder engineered for water-based lubricants, emulsions, coolants, and environmentally acceptable formulations. Its advanced hydrophilic surface treatment enables excellent compatibility and suspension stability in aqueous systems while delivering superior anti-wear, anti-friction, and thermal-transfer properties. Ideal for metalworking fluids, water-based coatings, and environmentally friendly lubrication technologies.
Solidex B050 is a medium-particle-size hBN powder developed for industrial lubrication, thermal-interface materials, release coatings, and high-temperature processing applications. Its average particle size of approximately 5 µm provides excellent surface coverage and heat-management properties while maintaining low-friction and anti-seize performance under demanding operating conditions.
Solidex B200 is a coarse-particle hBN powder with an average particle size of approximately 20 µm, designed for applications requiring high-temperature stability, enhanced surface coverage, and controlled release performance. It is widely used in forging compounds, refractory systems, sintering processes, thermal barriers, and specialty coatings where larger particle morphology improves durability and process efficiency.
Solidex W025 is a high-purity tungsten disulfide (WS₂) powder with an average particle size of approximately 2.5 µm, engineered for extreme-pressure (EP), anti-wear (AW), and ultra-low-friction applications. Its layered crystal structure forms a durable tribofilm capable of significantly reducing friction and metal-to-metal contact under severe loads and elevated temperatures. Solidex W025 is ideal for industrial greases, gear oils, metal-forming compounds, and high-load tribological systems.
Solidex M010 is a sub-micron molybdenum disulfide (MoS₂) powder with an average particle size of approximately 0.9 µm, developed for high-load lubrication and boundary-friction applications. Its refined particle size provides improved surface coverage, dispersion behavior, and load-carrying performance compared to conventional MoS₂ powders. Solidex M010 delivers reliable anti-wear, anti-friction, and extreme-pressure performance in grease, oil, and coating systems operating under demanding mechanical conditions.
Torvix W700 is a high-performance grease additive package combining sub-micron WS₂and hBN solids to deliver a unique balance of anti-wear (AW), anti-friction (AF), extreme-pressure (EP), and thermal-conductivity performance. The synergistic blend forms a uniform protective tribofilm that lowers friction, enhances load-carrying capacity, and improves heat dissipation under severe mechanical stress. Unlike traditional MoS₂ or graphite-based additives, W700 maintains a neutral gray-silver hue and does not significantly alter the color of the finished grease, making it ideal for premium multipurpose and OEM-branded formulations. Engineered for lithium, calcium-sulfonate, and polyurea systems, it ensures stable dispersion, long-term consistency, and measurable performance gains without compromising grease appearance or stability.
Torvix W720 is an advanced WS₂-based dispersion formulated to reduce or replace traditional MoS₂ in grease systems while maintaining or exceeding EP and anti-friction performance. Its sub-micron, surface-modified tungsten disulfide particles integrate seamlessly into soap and non-soap thickener systems, providing stable dispersion and superior wear resistance. Ideal for heavy-duty lithium, calcium sulfonate, and polyurea greases, W720 delivers lower friction coefficients, higher weld loads, and extended lubricant life at cost-effective treat rates.
Torvix X730 is a next-generation high-solids grease additive concentrate engineered to deliver exceptional anti-wear (AW), anti-friction (AF), extreme-pressure (EP), and thermal-management performance. Containing up to 60 % active solids—a proprietary blend of WS₂, MoS₂, and hBN—X730 combines the lamellar lubricity of MoS₂with the ultra-low friction of WS₂ and the thermal conductivity of hBN. This balanced synergy enables formulators to replace or significantly reduce conventional MoS₂ content while improving overall grease performance and lowering formulation cost. X730 disperses uniformly across lithium, calcium-sulfonate, aluminum-complex, and polyurea systems, maintaining long-term stability without sedimentation. The result is a cleaner with higher weld-load capacity, reduced friction coefficient, extended service life, and enhanced cost-to-performance ratio—ideal for modern high-demand industrial and transportation applications.
Torvix™ M770 is a high-performance grease additive concentrate built around ultra-refined molybdenum disulfide (MoS₂) engineered to deliver outstanding anti-wear (AW), extreme-pressure (EP), and anti-friction (AF) performance in demanding environments. Formulated with up to 60% lubricating solids and proprietary surface modifiers, M770 maximizes the lamellar shear properties of MoS₂ for sustained film strength, wear protection, and friction reduction under boundary and mixed lubrication conditions.
Optimized for lithium, lithium complex, calcium sulfonate, and aluminum complex greases, Torvix M770 enhances weld-load capacity, improves start-up and low-speed lubrication, and extends grease service life under shock loading and vibration. Its superior dispersion stability prevents settling or hard-packing, making it ideal for heavy-duty applications in mining, construction, steel processing, and off-road equipment.
Torvix M770 allows formulators to meet or exceed MoS₂-based OEM specs while reducing formulation cost and improving application performance consistency.
BHW-11010 is a zero-oil additive specifically formulated for lubricants, coolants, heat transfer fluids, coatings/surface treatments, cosmetics, 3D printing, composites and batteries. This product enhances anti-wear (AW), anti-friction (AF) properties and heat transfer properties making it ideal for applications in industries where water-based lubrication is preferred, such as metal working, textile manufacturing and food processing equipment. By incorporating BHW-11010, operators can achieve improved lubrication performance, reduced equipment wear and extended service life in environmentally conscious operations.
WA-400 is a zero-oil additive specifically formulated for emulsions and water-based lubricants. This product enhances anti-wear (AW) and anti-friction (AF) properties, making it ideal for applications in industries where water-based lubrication is preferred, such as metalworking, textile manufacturing and food processing equipment. By incorporating WWA-400, operators can achieve improved lubrication performance, reduced equipment wear and extended service life in environmentally conscious operations.
WWA-410 is a high-concentration, 50% Tungsten Disulfide (WS2) water-based dispersion, offering exceptional anti-wear (AW), anti-friction (AF) and extreme pressure (EP) performance. This advanced formulation is ideal for applications requiring superior lubrication and protection in environmentally conscious, water-based systems.
